The Sparkdog PF-DI daughter-board is fitted with an NXP MK10DX512 MCU. For reprogramming, the standard ARM SWD/JTAG 10-pin connector is…
Sparkdog MKS2xDUINO Controller Reprogramming
The Sparkdog MKS2XDuino Controller has 2 MCUs: NXP MKS20 Cortex M4, running at 120 MHz NXP MCS08 running at 40…
Sparkdog MKS2xDUINO Controller for Rabbit ECU
The Rabbit ECU has used a few different controllers in the past: ECUHost 1.4 Arduino Due Teensy 3.5 The ECUHost…
DSG Control with Rabbit ECU
DSG DQ250 The DQ250 is in simple terms, a 6 speed manual gearbox that is automated through electro-mechanical control…
Sparkdog PF-DI Extension
Sparkdog PF-DI Daughterboard for Rabbit ECU The base Rabbit ECU is an Arduino compatible ‘shield’ that makes it easy to…
ECUHost & Teensy
ECUHost OS Some people have been asking what is ECUHost? The simple answer is ECUHost OS is an automotive DIY…
DIY ECU Reprogramming by CAN
Background Modern cars contain many electronic control units (ECUs) and they are usually connected via CAN bus. Updating the ECU…
Rabbit ECU Turbo Project
GM Family 2 Engine Turbo Project The Family II is a straight-4 piston engine that was originally developed by Opel in…
MAP or MAF with Rabbit ECU
It’s all about the airflow! Rabbit ECU controls the fuel flow into your engine by way of first calculating…
Beating The OBD Using Rabbit ECU
Piggy-back Install This post is about the Rabbit ECU piggy-back install for the Commodore/Chev SS L98 engine with CAN bus.…