The Sparkdog PF-DI daughter-board is fitted with an NXP MK10DX512 MCU. For reprogramming, the standard ARM SWD/JTAG 10-pin connector is…

The Sparkdog MKS2XDuino Controller has 2 MCUs: NXP MKS20 Cortex M4, running at 120 MHz NXP MCS08 running at 40…

The Rabbit ECU has used a few different controllers in the past: ECUHost 1.4 Arduino Due Teensy 3.5 The ECUHost…

DSG DQ250   The DQ250 is in simple terms, a 6 speed manual gearbox that is automated through electro-mechanical control…

Sparkdog PF-DI Daughterboard for Rabbit ECU The base Rabbit ECU is an Arduino compatible ‘shield’ that makes it easy to…

ECUHost OS Some people have been asking what is ECUHost? The simple answer is ECUHost OS is an automotive DIY…

Background Modern cars contain many electronic control units (ECUs) and they are usually connected via CAN bus. Updating the ECU…

GM Family 2 Engine Turbo Project     The Family II is a straight-4 piston engine that was originally developed by Opel in…

It’s all about the airflow!   Rabbit ECU controls the fuel flow into your engine by way of first calculating…

Piggy-back Install This post is about the Rabbit ECU piggy-back install for the Commodore/Chev SS L98 engine with CAN bus.…